Mondeo 2007.5 (02.2007-) > Ford Workshop Service and Repair Manuals > Mechanical Repairs | 3 Powertrain | 303 Engine | 303-01E Engine - 1.8L Duratorq-TDCi (Lynx) Diesel | Description and Operation | Diagnosis and Testing | General Procedures | Removal and Installation | Removal | Disassembly | Assembly | Engine I have a 2004 Mondeo (Euro3) 2.0 TDCI 130 which has thrown up P0251/P1211 this past year when putting the foot down at lower revs (and particularly up hills and coming out of corners). I have had the valves in the injectors replaced and tested by a diesel specialist, new IMV, Ford fuel filter and checked the pickup in the tank and main fuel lines. The new engine increases the 2.2 TDCI Mondeo’s kerbweight by 28kg compared to the 2.0 TDCI, explaining the slightly underwhelming performance: the claimed 8.7 second 0-62 mph time is just half a So my dad has been having issues with his mondeo, relating to the fuel system! his 4 injectors failed the leak back test so new ones are put in! Enjoy.OBD To Here's how I changed glow plugs on my 2009 2.2 TDCi Mondeo. I am sure that there is a better way to do it, but this is how I did it. Please let us all know if you have suggestions on how to do it with less effort. 1. Remove fuel filter and filter bracket - remove the collision shield, 4x 10 mm nuts - undo the filter bolts, 3x 6 mm Allen Have an 03 plate 2.0 TDCI with 80K on the clock. Since buying vehicle in Feb 2010 i have had what seems a commom thread link but have been unable to get to the root cause of the issue. Problem Description -. Erratic idle and if engine revved around 1800 rpm + the engine feels like it is running on 3 cylinders - significant misfire affect. 32K views 4 years ago. Please subscribe! http://www.fixit4free.com http://www.cleverproducts.co.uk How to change the fuel filter on the MK5 Ford Mondeo 2.0 TDCi Engine more. more. ford mondeo 2.0 tdci - mondeo 2.0 tdci air in fuel system - wavecars : hi. I have just changed the injectors on my car and it wouldn't start, I checked the fuel filter and it was full of air so I used a hand primer and filled the filter then filled the pipe to the pump but it still wont start. I have taken it to a local garage and they did the EC5I0L.